Maintenance & Management
-
Agile operation even with big data sets for whole factories, entire regions, and moreTEPSCO Web3D Viewer
This is TEPSCO’s own unique 3D viewer that we have created just from web technologies. It is browser-based and enables 3D data to be quickly and easily shared, meaning that the same 3D data can be used by everyone.
-
Image Recognition Technology and Vehicle Surveillance System
Our fully integrated all-in-one vehicle surveillance system provides our clients the surveillance needed according to the respective environment, such as image recognition device and ETC/ID authentication device, traffic control gates, and management software for registering and granting access to permitted vehicles.
-
Facility management system using 3D dataNaviPortal®2022
NaviPortal®2022 is information management software equipped with our unique 3D viewer. By adding the following functions to the diagram viewer software, you can utilize diagrams (including 2D drawings and 3D models) in daily maintenance and management tasks. It also makes it easy to search for related information on facilities and equipment depicted in the diagrams.
-
Remote monitoring sensors developed for lattice tower managersDELI-FACT®
DELI-FACT® replaces all measurement tasks that customers performed on site with a monitoring system and provides them with the measurement data.
-
Software to automatically visualize gas flow paths through pipingIsolationNavi®
To resolve the problems of isolation work, our company worked in tandem with Osaka Gas Co., Ltd., and Daigas G&P Solution Co., Ltd. to develop IsolationNavi®. This software digitalizes drawings of plant equipment such as piping and control valves and automatically visualizes the flow path of the gas as it changes due to the opening and closing of control valves.
-
Estimating residual tension in PC steel using the surface strain method Deterioration Diagnosis Technology for PC Road Bridges
By measuring the surface strain and crack widths of PC (Prestressed Concrete) girders, it is possible to detect the behavior of cracks running perpendicular to the bridge axis when vehicles are driving over it and estimate the residual tension of the PC steel to determine the degree of deterioration and need for repairs.
-
Visualization of the risks and values of invisible structures undergroundSeismic Risk Assessment Service for Buried Linear Structures
The extent of damage caused by the largest earthquake expected to occur during the in-service period of structure is expressed as a percentage of the structure’s reconstruction cost (the total cost to rebuild all parts of the structure at once).
-
A wide lineup of measurement tools to respond to diversified needs at different sites3D Measurement
We offer services for measuring your worksite using a 3D laser scanner, creating drawings or models based on the data, and analyzing them. We will choose the most suitable measurement equipment from our wide lineup of tools.
-
Creating models with optimal detail for customer needsAs-Is Data Creation
We offer a service to create 2D diagrams and 3D models based on 3D measurement data. This can be expensive, so we also offer mesh models using cloud point data at a reasonable price. We can minimize costs by tailoring the modeling to your purposes.
-
Supporting building maintenance using a databaseFacility Management System
We offer a service to streamline facility inspections using mobile tools and automate inspection data input through data linkage. This will improve long-term repair plans by establishing an information infrastructure through the unification of BIM models and the facility registry.
-
Replication of On-Site Environments Using Mixed RealityVirtual Control Room for Training
This system allows engineers to confirm the issues without having to physically visit the sites and also makes on-site simulation and skill transfer much easier.
-
Cloud Integration of On-Site Inspected Instrument DataInstrument Calibration Data Management System
This system aggregates and shares the previously dispersed instrument calibration data and also incorporates features to monitor inspection progress, manage the calibration of measuring instruments, and perform simplified drift evaluations of instruments.
-
Providing Quick and Accurate Reports from the Site in Times of DisasterReport and Contact System
This system allows users to automatically send the necessary information from power plants and so on, create reports on the cloud, and submit them to the relevant parties.
-
Overall assessment of output control volume using detailed simulationsOutput Control Assessment Service for Non-Firm Connections
We offer an output control assessment service by conducting electrical power system simulations in addition to electric power supply and demand simulations.
-
Using 3D-CAD to study layouts for ducts, piping, cable racks, and other equipment3D-CAD Equipment Layout Studies
When designing facilities that involve complex machinery rooms with interconnected components such as piping, ducts, and cable racks, we use 3D-CAD technology from the initial design stage to conduct preliminary studies. This helps to minimize design rework and potential interference with surrounding structures, piping, etc., during the construction process.
-
Proper introduction and operation of BCP is key to swift recovery after disastersSeismic and Deterioration Diagnosis
Disasters can cause irreparable losses to businesses, such as damage to production lines and office buildings, resulting in difficulties with business continuity and delivery delays that can erode customers’ trust.
-
Conducting simple load surveys during refurbishment designs to properly evaluate air conditioner capacitySimplified Measurement Technology
In addition to our design services, we conduct building diagnosis using simple measurements to assess current conditions.This is particularly crucial in areas like server rooms, where equipment with high heat generation, such as electrical panels, is commonly installed. Manufacturers often assume excessive safety factors when presenting heat generation conditions for equipment.
-
System to improve seismic resistance of stacksPantograph Damper
We directed our attention towards the deformation mode of the main posts in the lower section of the steel tower.
-
Vibration control system to improve seismic resistance of steel towersVertical Shear Links
Our vibration control system, which consists of arm parts and vibration control dampers, effectively reduces swaying by exerting a damping effect on the bending deformation of tower structures.
-
Visualization of disaster countermeasures by a series of analytic simulationsPractical application of integrated earthquake simulations
The following is an application of the Integrated Earthquake Simulator (IES) targeted at an actual city.
-
Youth paper prize was received at the World Conference on Earthquake Engineering in 2021Verification of 3D coupled analysis of ground and foundation
In urgent need of assuming severe seismic motion, we understand the behavior of a structure during an earthquake by making a 3D model of a facility or a structure that may be subjected to the influence of liquefaction in a faithful manner to the actual shape.
-
3D liquefaction analysis of block scale
In recent years, for the purpose of assuming earthquake damage to an entire city and traffic network and considering countermeasures, the seismic response for the wide area of a city block and city scale has been attempted.
-
Slope failure analysis with Distinct Element Method (DEM)
Detailed failure processes of a mountain slope can be calculated when traced with the Distinct Element Method.